TYPICAL USES
1. Reset loose stones on cuff links, jewelry, brooches, bracelets, and other accessories.
2. Repair broken ivory statuettes, figurines, antiques, etc.
3. Restore/repair precious handcrafted vases, jars, pots, and other types of decors.
4. Bond porcelain or metal designs and initials on bracelets, nameplates, etc.
PACKAGING
BLISTER PACK
Singles 35mL/set 12 sets/box
SURFACE PREPARATION:
- Surface contaminants such as dirt, grease, oil, or wax must be removed from areas to be joined. Clean surfaces by sanding, sandblasting, or brushing for stronger bonds. Surfaces should be clean and ready for application before the adhesive is mixed.
MIXING:
- Mix equal part by volume of Part A and Part B. Blend thoroughly until color streaks disappear and uniform color is obtained. To avoid waste, prepare a quantity of just enough to be consumed within the pot life period (2-4 hours).
METHOD:
- Apply the mixed compound with a putty knife or spatula on one or both faces of glue joints. Join surfaces with sufficient pressure to ensure complete contact. Allow to cure or to harden. Unnecessary handling should be avoided until a cure is complete.
HEALTH PRECAUTIONS:
If skin contact occurs, wash with soap and water. If skin irritation persists, seek medical attention. If material contacts the eyes, flush thoroughly with water and get medical attention immediately. Do not take it internally. Keep material out of children’s reach.
Clean all tools or equipment used while adhesive is still in its uncured state. Use acetone, toluene, methyl ketone or kerosene to clean tools and spills.
