TYPICAL USES
1. Bond parts and accessories for do-it-yourself projects and hobbies
2. Bond porcelain or metal designs to wood, marble, concrete and many other materials
3. Mend china wares and pottery
PACKAGING
BLISTER PACK
Singles 35mL/set 12 sets/box
SURFACE PREPARATION:
- Surface contaminants such as dirt, grease, oil or wax must be removed from areas to be joined. Clean surfaces by sanding, sandblasting or brushing for stronger bonds. Surfaces should be clean and ready for application before the adhesive is mixed.
MIXING:
- Mix equal part by volume of Part A and Part B. Blend thoroughly until colour streaks disappear and uniform colour is obtained. To avoid waste, prepare a quantity just enough to be consumed within the pot life period (3-5 minutes).
METHOD:
- Apply mixed compound with a putty knife or spatula on one or both faces of glue joints. Join surfaces with sufficient pressure to ensure complete contact. Allow to cure or to harden. Unnecessary handling should be avoided until cure is complete.
HEALTH PRECAUTIONS:
If skin contact occurs, wash with soap and water. If skin irritation persists, seek medical attention. If material contacts the eyes, flush thoroughly with water and get medical attention immediately. Do not take internally. Keep material out of children’s reach.
CLEAN UP
Clean all tools or equipment used while adhesive is still in its uncured state. Use
acetone, toluene, methyl ketone or kerosene to clean tools and spills.
