How To Install Bathroom Accessories

Home How To Guides How To Install Bathroom Accessories
Want to install some accessories in your bathroom but you’re too afraid of drilling into your tiles? Fear no more – Selleys Hold Up is here! Follow this step by step guide to installing bathroom accessories like a pro.

Want to install some accessories in your bathroom but you’re too afraid of drilling into your tiles? Fear no more – Selleys Hold Up is here! Follow this step by step guide to installing bathroom accessories like a pro.

Beginner Intermediate Advanced
1 hour

What You Need

  • Bathroom accessories (toilet roll holder, towel rack, towel ring) – ensure accessories have a flush back (not inset)
  • Spirit level

Easy as...

1. Make sure the surfaces are clean, free from grease, grit and grime.

2. Cut the Selleys Hold Up nozzle at the second line on a 45 angle.

3. Apply Selleys Hold Up to the bathroom accessory you wish to install.

4. Press the accessory firmly against the wall in place.

5. If installing a towel rail (or similar accessory) use a spirit level to ensure your placement is level – if not, simply adjust (Selleys Hold Up is adjustable for up to 15 minutes).

6. Immediately clean any excess adhesive with white spirits before product cures.

7. Wait at least 48 hours until product is fully cured before adding weight (longer cure times will be needed in cold or dry conditions or where both surfaces are non-porous)



X